Troubleshooting - Klarstein LIBEICA Mode D'emploi

6 Press the coffee button again (without adding coffee powder) and repeat step
4 3 times (without waiting 15 minutes). Then brew coffee (without adding
coffee powder) until there is no more water in the water tank.
7 Repeat step 6 at least 3 times to ensure that the lines are free of residues.

TROUBLESHOOTING

Problem
No water comes out.
No steam is produced.
Coffee runs out over the
edge of the filter holder.
Possible cause
The water tank is empty.
The input current does
not match the voltage
indicated on the type
plate.
Appliance
malfunctioning
The steam nozzle is
clogged.
The water tank is empty.
Appliance
malfunctioning
Too much coffee powder
in the filter
There is coffee powder
under the sealing ring.
The sealing ring is
damaged/leaking.
Solution
Fill up the water tank.
Make sure that the input
voltage corresponds to
the voltage indicated on
the type plate.
Contact customer
service.
Clean the steam nozzle.
Fill up the water tank.
Contact customer
service.
Switch off the appliance
and wait until it has
cooled down. Clean the
filter and fill it with the
appropriate amount of
coffee powder.
Remove the coffee
powder from the sealing
ring.
Contact customer
service.
EN
29