Troubleshooting - Klarstein Espressionata Gusto Mode D'emploi

EN
36

TROUBLESHOOTING

Symptom Possible Cause
Water leaks There is too much water in the
from the drip pan.
bottom of the
The Espresso Maker
appliance.
malfunctions.
Water leaks out There is coffee powder on
of the filter. filter edge.
The Espresso Uncorrect cleaning of mineral
has got an deposits.
acidic (vinegar-
like) taste.
The coffee powder has been
stored in a hot, wet place for a
long time.
The coffee powder has turned
bad.
The Espresso The power supply is not
Maker oes not connected to the wall socket.
work.
The steam does The water for preparing steam
not froth. is not hot yet.
The vessel is too big.
The shape of the vessel is
inapproriate.
You have used skimmed milk
Solution
Empty the drip pan.
Please, contact a service centre
authorised by the manufacturer.
Remove the excess coffee from
the filter
Clean the Espresso Maker as
described in Cleaning and
Maintenance.
Use fresh coffee powder.
After opening a package of coffee
powder, reseal it tightly. Store
coffee powder in a cool, dry
place, such as a refrigerator.
Plug the power cord into a wall
outlet.
If the appliance still does not work,
contact a service centre authorised
by the manufacturer.
Wait until the STEAM indicator
lights to show that the water is hot.
Use a high and narrow cup.
Use whole milk or half-skimmed
milk