Initial Setup -Ready To Play - Panasonic PV-20DF64-K Mode D'emploi

Initial Setup -Ready to Play-

EJECT
POWER
ACTION
SELECT
▲ ▼◄►
STOP
POWER
Initial Setup (Ready to Play)
Please make all cable or antenna
connections before powering on.
Plug the unit power cord into an AC wall
outlet.
1 Press POWER on the remote or unit.
2 Press ▲, ▼, or
VOL+ to select
language.
3 Auto channel and clock set starts.
• If you use a cable
box, turn it on and
set it to the Public
Broadcasting
Service (PBS)
channel in your
time zone. If you
use a DSS
receiver, it must be
turned off.
18
All manuals and user guides at all-guides.com
SET
VOL+
STOP
SELECT LANGUAGE
PRESS CH :English
APPUYER CH :Français
OPRIMIR VOL+ :Español
CH AUTO SET PROCEEDING
AUTO CLOCK SET
PROCEEDING
CANCEL:STOP
• Function buttons are void during Initial Setup.
• If Auto Clock Set takes more than 30 minutes,
press STOP and perform settings manually. (See
pages 19-21.)
Case 1
Settings are made
automatically. When
complete, this screen
appears.
Case 2
If setup is incomplete,
the following screen
appears. Check
connection of
Antenna/Cable to the
RF in Terminal, then
try manually to set the
clock as follows.
a. Press ACTION on the Remote to
display SET CLOCK Menu screen.
b. Press ▲ ▼ to select the month and
press SET to set. In the same
manner, select and set the date, year,
time, and DST (Daylight Saving Time).
• Press ◄ repeatedly to move the cursor. Press
▲▼ to make a correction.
c. Press ACTION twice to start CLOCK
and exit.
10/25/2004 MON 11:45AM
DST:ON
SETTING : CH 10
AUTO CLOCK SET
COMPLETED
AUTO CLOCK SET
IS INCOMPLETE
PLEASE SET CLOCK BY
PRESSING ACTION KEY
SET CLOCK
1/ 1/2004 THU 12:00AM
DST:ON
SELECT: SET:SET
START :ACTION
SET CLOCK
10/25/2004 MON 11:45AM
DST:ON
SELECT: SET:SET
START :ACTION