Connections; Antenna Connection; Cable Connection - Panasonic PV-20DF64-K Mode D'emploi

Connections

Notes on con nec tions
• Turn off the power supply for all com po nents before making any connections.
• If the cables necessary for connecting a component to the system are not included with the
component or available as an option, you may need to fashion a cable to suit the component
concerned.
• Read the instruction manual for each system component care ful ly before connecting it.
Connecting the RF in Terminal
CAUTION
Overtightening "Nut type" RF coaxial cables may damage jacks.
Finger tighten only.

Antenna Connection

Connect the cable from Antenna to the VHF/UHF terminal on the unit.

Cable Connection

Connect the cable supplied by your local cable company to VHF/UHF terminal on the unit.
Note to CABLE system installer:
This re mind er is pro vid ed to call
the CABLE (Cable TV) System
Installer's at ten tion to Article
820-40 of the NEC that pro vides
guide lines for proper grounding
and, in par tic u lar, specifies that
the cable ground shall be
con nect ed to the ground ing
system of the build ing, as close to
the point of cable entry as
practical.
In from CABLE
14
All manuals and user guides at all-guides.com
VHF
Antenna
Mixer
Cable Box
UHF
Antenna
Or