Starting The Programme; End Of Programme; Switching Off - Miele professional PG 8057 TD Mode D'emploi

en - Operation

Starting the programme

Press the Start/Stop button.

The LED for the Start/Stop button will light
up and the LED for the  button will go
out.
Programme sequence indicator
After the start of a programme, the wash
phase description and, for 10 seconds,
gramme running
are shown in the display.
During the programme sequence, the  and
 arrow buttons can be used to switch
between the wash phase, the set temperat-
ure and the actual temperature or, in the
case of appliances with the Vario TD pro-
gramme, the A0 value in the second line of
the display.
The time remaining is shown in the third line
of the display.
Universal
Main wash
Duration

End of programme

After a programme has ended normally, the
Start/Stop button's LED will go out and the
 button's LED will flash.
The middle line of the display alternates
between the set temperature and the A0
value on a continuous loop. The message
Programme finished
tom line of the display.
Universal
Temperature
Programme finished
In addition to this, a buzzer will sound for
approx. 3 seconds (factory default setting).
If the AutoOpen function has been activ-
ated, the door will automatically open a few
centimetres.
38
G
23
Min
will appear in the bot-
55 °C
If the switch-off function is enabled, the
commercial dishwasher switches itself off
after a short period of time.
Press the  button to switch it on again.

Switching off

Press the  button until the LED in the

button goes out.
Pro-