Correct Use - Miele professional PG 8057 TD Mode D'emploi

Masquer les pouces Voir aussi pour PG 8057 TD:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 60
The dishwasher must not be used if the electrical connection cable is damaged. A dam-
aged connection cable may only be replaced by a suitable connection cable of the same
type. For safety reasons, such replacement may only be carried out by the Miele Customer
Service Department or a qualified service technician.
The dishwasher must be disconnected from the mains electricity supply before any
maintenance or repair work is carried out.
The plastic housing of the water connection contains electrical components. It must not
be dipped in water.
There are electrical wires in the water inlet hose. Do not shorten the water inlet hose,
even if it is too long.

Correct use

This dishwasher is designed for operation with water and cleaning agents suitable for
use in commercial dishwashers only. Organic solvents and flammable liquid agents must
not be used in it.
This could cause an explosion, damage rubber or plastic components in the dishwasher
and cause liquids to leak out of it.
Unsuitable cleaning agents could adversely affect components of the dishwasher or the
items being cleaned.
Do not sit, stand or lean on the opened door. This would tip or damage the dishwasher.
After any plumbing work the water pipework to the dishwasher will need to be vented. If
this is not done, components can be damaged.
Please be aware that the dishwasher may be operating at high temperatures. When the
door is opened there is a danger of burning or scalding. Items, baskets and inserts must
be allowed to cool down before they are unloaded. Any water remaining in containers
could still be very hot. Empty them into the wash chamber before taking them out.
The water in the cabinet must not be used as drinking water.
Pre-treating items (for example with washing-up liquid and other cleaning agents) as
well as some types of soiling and some cleaning agents can cause a build-up of foam in
the wash cabinet. Foam can have an adverse effect on the cleaning result.
Foam escaping from the wash cabinet can cause damage to the dishwasher. If foam es-
capes the programme must be cancelled immediately and the machine must be discon-
nected from the mains electrical supply.
When using cleaning agents and specialised products, it is essential that the manufac-
turer's instructions are followed. Cleaning agents must only be used for the purpose they
are designed for by the manufacturer to avoid any material damage or the occurrence of
strong chemical reactions (e.g. oxyhydrogen explosion).
To avoid material damage and corrosion, do not allow any acids or solutions containing
chlorides or metals which are not rust-proof to get into the wash cabinet.
Do not wash items soiled with ash, sand, wax, lubricating grease or paint in the dish-
washer. These materials will cause damage to the dishwasher.
Do not clean the dishwasher or near vicinity with a hose or a pressure washer.
en - Warning and Safety instructions
27

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Pg 8057 td dosPg 8058Pg 8058 dosPg 8059Pg 8059 dosPg 8099 ... Afficher tout

Table des Matières