Warning And Safety Instructions; Correct Installation; Technical Safety - Miele professional PG 8057 TD Mode D'emploi

Masquer les pouces Voir aussi pour PG 8057 TD:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 60
en - Warning and Safety instructions

Correct installation

Do not install this dishwasher in an area where there is a risk of explosion or freezing
conditions.
Be careful before and while installing the dishwasher. Wear protective gloves.
To ensure stability a built-under dishwasher must only be installed beneath a continuous
worktop that is bolted to the adjacent cabinetry.
In order to reduce the risk of damage from condensation, the furniture in the area
around the dishwasher must be designed for commercial use.

Technical safety

This dishwasher must only be commissioned, repaired and maintained by the Miele
Customer Service Department, a dealer or a suitably qualified service technician. Unau-
thorised installation, maintenance and repairs can cause considerable danger for the user.
This dishwasher must only be operated by appropriately trained personnel. They must
be instructed and trained regularly.
Before using the dishwasher, check it for any externally visible damage. Do not use a
damaged dishwasher. This could be dangerous.
In the event of a damaged or leaking dishwasher, switch off at the power supply imme-
diately and call the Miele Customer Service Department, a Miele dealer or a suitably quali-
fied service technician.
Faulty components must only be replaced by genuine Miele original spare parts. Only
when these parts are fitted can Miele guarantee the correct functioning and safety of the
appliance.
The electrical safety of this dishwasher can only be guaranteed when correctly earthed.
If in any doubt, please have the electrical installation tested by a qualified electrician.
Please follow the advice on installation in these instructions and the separate Installation
diagram.
Before connecting the appliance, ensure that the connection data on the data plate
(voltage, frequency and fuse rating) match the mains electrical supply.
There must be no electrical sockets behind the dishwasher. There is a danger of over-
heating and risk of fire if the dishwasher is pushed up against a plug. See "Electrical con-
nection" in the main operating instructions for further information.
Do not connect the dishwasher to the mains electricity supply via a multi-socket unit or
an extension lead. These do not guarantee the required safety of the machine (e.g. danger
of overheating).
Warning. Do not open the casing of the dishwasher. Any contact with live connections
or tampering with the electrical or mechanical components of the dishwasher will en-
danger your safety and may lead to machine malfunctions.
26

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Pg 8057 td dosPg 8058Pg 8058 dosPg 8059Pg 8059 dosPg 8099 ... Afficher tout

Table des Matières