Sentiotec VITAE 350 Instructions Pour L'installation Et L'utilisation page 5

Instructions for installation and use
● Ensure that the infrared radiator is not exposed to any mechani-
cal stress, as this will result in breakage. A radiator with a glass
front or radiator element that is broken may no longer be used.
The glass or the radiator element must be replaced (for the item
number, see 8. Technical data on page 14)
● When positioning and installing the infrared radiator, the mini-
mum safety distances must be complied with (see 5.1. Safety
distances on page 10)
● The radiator satisfies the requirements in accordance with IPX2.
For splashproof installation in accordance with IPX4, the edge of
the infrared radiator must be fitted with a veneer (e.g: stainless
steel panel, see 3.3. Optional accessories on page 7)
● Radiators must not be installed in a steam bath.
● For your own safety, consult your supplier in the event of problems
that are not described in sufficient detail in the user instructions.
● Make sure that no flammable objects have been placed on or
suspended in front of the infrared radiator before the control unit
is switched on.
● Never touch the glass on the infrared radiator when it is operating.
The glass on the infrared radiator becomes very hot. Depending
on the user function, contact protection may need to be installed
(e.g: wooden backrest, protective grille, see 3.3. Optional acces-
sories on page 7).
● The device must not be used by children under 8 years of age.
p. 5/16
EN