Connections - OK. ODL 55651U-TIB Mode D'emploi

Connections

Connector Type
VGA
Connection
(back)
PC/YPbPr
AUDIO IN
Audio
Connection
(back)
HDMI
Connection
(side&back)
SPDIF
SPDIF
(Optical Out)
Connection
(back)
Back AV
BACK AV
(Audio/Video)
Connection
(back)
HEADPHONE
Headphone
Connection
(side)
YPBPR YPbPr Video
Connection
(back)
USB
Connection
(side)
CI
Connection
(side)
LAN
Ethernet
Connection
(bottom)
If you want to connect a device to the TV, make sure that both the TV and the device are turned off before making
any connection. After the connection is done, you can turn on the units and use them.
Cables
YPbPr/PC Audio Cable
Audio Video Cable
PC to YPbPr Connection Cable
LAN / Ethernet Cable
English - 41 -
NOTE: When connecting a
Device
device via the YPbPr or Back
AV inputs, you must use the
connection cables to enable
connection. See the illustrations
on the left side. | You can use
YPbPr to VGA cable to enable
YPbPr signal via VGA input. |
You cannot use VGA and YPbPr
at the same time. | To enable PC/
YPbPr audio, you will need to use
the back audio inputs with a
YPbPr/PC audio cable for audio
connection. | When using the
wall mounting kit (available from
third party in the market, if not
supplied), we recommend that
you plug all your cables into the
back of the TV before mounting
on the wall. | Insert or remove
the CI module only when the TV
is SWITCHED OFF. You should
refer to the module instruction
manual for details of the settings.
| The/Each USB input of your TV
supports devices up to 500mA.
Connecting devices that have
current value above 500mA may
damage your TV. | By connecting
an HDMI cable to your TV, you
have to use only a shielded (high
grade) HDMI cable to guarantee
a sufficient immunity against
parasitic frequency radiation. And
make sure to use a High-Speed
HDMI cable that can transmit
high definition signals, such as
4K contents, for trouble-free
transmission.