Safety Warnings - Makita UR006G Manuel D'instructions

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Handle type
No load speed
(at each rotation speed level)
Overall length
(without cutting tool and battery)
Nylon cord diameter
Applicable cutting tool and
cutting diameter
Rated voltage
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Recommended cord connected power source
Portable power pack
• The cord connected power source(s) listed above may not be available depending on your region of residence.
• Before using the cord connected power source, read instruction and cautionary markings on them.

SAFETY WARNINGS

Important safety instructions
WARNING:
When using electric gardening
appliances, basic safety precautions should
always be followed to reduce the risk of fire,
electric shock, and personal injury, including the
following.
2-tooth blade
(P/N 198345-9)
3-tooth blade
(P/N 195299-1)
4-tooth blade
(P/N 195150-5)
(P/N 196895-8)
Nylon cutting head
(P/N 198893-8)
UR006G
Bike handle
1,815 mm (71-1/2")
D.C. 36 V - 40 V max
5.7 - 6.3 kg (12.6 - 13.9 lbs)
BL4020 / BL4025* / BL4040* / BL4050F*
* : Recommended battery
DC40RA / DC40RB / DC40RC
Read All Instructions
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
SAVE THESE INSTRUCTIONS.
General instructions
1. Never allow people unfamiliar with these instruc-
tions or children to use the machine. Local reg-
ulations can restrict the age of the operator. It is
dangerous in the hands of untrained users or children.
Be sure that anyone who is to operate the tool
2.
has first read the instruction manual.
2 ENGLISH
UR007G
Loop handle
3: 0 - 7,000 /min
2: 0 - 5,500 /min
1: 0 - 4,600 /min
2.0 mm (0.08")
255 mm (10")
255 mm (10")
230 mm (9")
255 mm (10")
430 mm (17")
5.3 - 5.9 kg (11.7 - 13.0 lbs)
PDC01 / PDC1200