Using The Twist Lock Blending Arm - KitchenAid KHBC308OB Mode D'emploi

OPERATING THE COMMERCIAL IMMERSION
BLENDER

USING THE TWIST LOCK BLENDING ARM

1. Insert blending arm attachment into
motor body with the alignment mark
facing the back of the unit, and twist
to lock. The alignment mark on the
attachment should line up with the
mark on the body.
In some European factories the letter "W" of the part code mentioned herein will be automatically
W10638076D.indb 7
18-Dec-2018 14:08:30 EST | RELEASED
OPERATING THE COMMERCIAL IMMERSION BLENDER | 7
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
2. Plug into a grounded 3 prong outlet.
3. Set Commercial Immersion Blender to
Low or High
4. Insert the Commercial Immersion
Blender into the mixture.
NOTE: The Commercial Immersion
Blender should only be immersed in
liquids the length of the attachment. Do
not submerge beyond the seam of the
blending attachment. Do not immerse
the motor body into liquids or other
mixtures. To avoid damaging blades or
mixing container, do not touch the blade
to the bottom of the mixing container
or use in a mixing container that has
protruding parts that can go under the
metal guard.
5. Press the Lock switch to unlock
Commercial Immersion Blender.
6. Press the Power button to activate
the Commercial Immersion Blender.
7. When blending is complete, release
the power button before removing
Commercial Immersion Blender from
the mixture.
8. Unplug immediately after use, before
removing or changing attachments.
speed.
11/27/2018 11:26:28 AM