Functions - Castel XELLIP XEK-AUDIO-1B Fiche Technique

AUDIO VIDEO IP KIT

FUNCTIONS

The kit is designed to interface, via the IP network, with all the other kits of the Intercom over IP range (XELLIP, CAP
IP, etc.), with a Softphone, a SIP telephone, or any other element compatible with the SIP standard.
General functions of the kit

Configuring a network connection.

Configuring an SIP account

Setting the date and time manually or via an NTP server

Management of audio and video communications (according to version)
↘ Setting a level of priority for the kit
↘ Setting a call and communication timeout
↘ Automatic answering with and without delay
↘ Activating privacy mode for automatic answering
Audio interface functions

Configuring the volume of the speakers, microphone and audio induction loop

Configuring the Anti Echo Acoustic (AEC)

Configuring the RTP port number

Enabling/Disabling audio codecs

Configuring ring tones and tones

Configuring DTMF commands used to control the local relay, for example

Configuring noise detection used to activate a call, for example

Switch to simplex via a DTMF command (for kits with keypad):
↘ '*' switches to listening simplex
↘ '#' switches to speech simplex
↘ '0' is used to return to standard operation
Video interface functions

Resolution selection (QCIF/QVGA/CIF/VGA/HD)

Activating bandwidth management

Configuring the RTP port number

Enabling/Disabling video codecs
Programmable button functions
Each button can be programmed and is used to:

Call 1 to 10 kits simultaneously or with timeout

Control the local relay, the relay of the kit on a call

Send a DTMF code

End a call
Digital input interface functions

STATUS or COUNTER input configuration

Input active status configuration (open or closed contact)

Recognition timeout configuration for a status change (debouncing function)

Counter threshold configuration

Input inhibition
Output interface functions

Relay output type configuration: monostable, bistable or flashing

Normally Open/Normally Closed contact configuration

On/Off output control

Open/Closed override output control

Output time parameter configuration
Logical input functions (or flags)
The logical inputs enable two functionalities in particular:

Creation of a logical status from which actions can be conditioned in relationships.

Creation of a counter that will be updated according to events and depending on the value of this counter,
possibly trigger one or more actions.
Technical data sheet no. EN-604-0092C www.castel.fr
FR
EN
Page 17 / 20