Castel XELLIP XEK-AUDIO-1B Fiche Technique page 13

AUDIO VIDEO IP KIT
Speaker connection (HP/HP)
The connection is made with a 1 pair non-polarised cord and the kit's screw terminal.
Connect the speaker cord to the speaker terminals of the kit terminal.
PB connection (PBx/GND)
The connection is made with a 1 pair non-polarised cord and the kit's screw terminal.
Connect the button cord to the PB terminals of the kit terminal.
LED connection (blue/yellow/green)
The kit is supplied with three LEDs coloured blue, yellow and green.
For each LED the connection is made with a 1 pair polarised cord and the kit's screw terminal identified as
'CALL_LED, COM_LED, DOOR_LED' LED color in consecutive order blue, yellow and green.
Connect the white wire of the LED to the + terminal of the kit terminal associated with the LED colour.
Connect the blue wire of the LED to the - terminal of the kit terminal associated with the LED colour.
Camera connection
The kit is supplied with a USB camera and a 2 m cord.
Connect the USB cord of the camera to the USB socket of the Kit.
Possibility of offsetting the camera up to 10 m via a shielded USB extension.
Protection against electrostatic discharges
Connect the device to the ground using the terminal provided (Mounted on the box).
Technical data sheet no. EN-604-0092C www.castel.fr
FR
EN
Page 13 / 20