Use And Care Information - Turin Aspen Manuel D'installation, D'utilisation Et D'entretien

11. USE AND CARE INFORMATION

Operations:
• Read and understand all instructions and warnings in this manual before operating the appliance. Save these
instructions for future reference.
• Always leave safety grills and filters in place. Without these components, operating blowers could catch on to hair,
fingers and loose clothing.
• NEVER dispose cigarette ashes, ignitable substances, or any foreign objects into blowers.
• NEVER leave cooking unattended. When frying, oil in the pan can easily overheat and catch fire. The risk of self
combustion is higher when the oil has been used several times.
• NEVER cook on "open" flames under the range hood.
Never put your hand into area housing the fan while the fan is operating!
Cleaning Fan:
• The saturation of greasy residue in the blower and filters may cause increased inflammability. Keep unit clean and
free of grease and residue build-up at all times to prevent possible fires.
Cleaning Filters:
• Filters must be cleaned periodically and free from accumulation of cooking residue Old and worn filters must be
replaced immediately.
• DO NOT operate blowers when filters are removed. Never disassemble parts to clean without proper instruc-tions.
Disassembly is recommended to be performed by qualified personnel only. Read and understand all instructions
and warnings in this manual before proceeding.
Filters should be cleaned monthly. Our filters are dishwasher safe. However the soap you use and the water type in
your area may react with the filters discoloring them. Discoloration is NOT covered by the warranty and does not af-
fect performace. We suggest hand washing using warm water and phosphate-free dishwashing detergent to clean
the filters. Let them dry and reinstall them. Discoloration of the filters may occur if using phosphate detergents or
as a result of localwater conditions.
Cleaning Exteriors Surfaces:
• Clean periodically with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive detergent (e.g.
Comet®, EZ-Off® oven cleaner), or steel wool/scoring pads, which will scratch and damage the stainless steel
surface. For heavier soil use liquid degrease such as "Forumla 409®" or "Fantastic®" brand cleaner.
• If hood looks splotchy (stainless steel hood), use a stainless steel cleaner to clean the surface of the hood. Avoid
getting cleaning solution onto or into the control panel. Follow directions of the stainless steel cleaner. CAUTION:
Do not leave on too long as this may cause damage to hood finish. Use soft towel to wipe off the cleaning solution,
gently rub off any stubborn spots. Use dry soft towel to dry the hood.
• After cleaning, you may use non abrasive stainless steel polish such as 3M® or ZEP®, to polish and buff out the
stainless luster and grain. Always scrub lightly, with clean cotton cloth, and with the grain.
• DO NOT allow deposits to accumulate or remain on the hood.
• DO NOT use ordinary steel wool or steel brushes. Small bits of steel may adhere to the surface and cause rusting.
• DO NOT allow salt solutions, disinfectants, bleaches, or cleaning compounds to remain in contact with stainless
steel for extended periods. Many of these compounds contain chemicals, which may be harmful. Rinse with water
after exposure and wipe dry with a clean cloth.
15
WARNING
WARNING