Turin Aspen Manuel D'installation, D'utilisation Et D'entretien page 12

9B. RANGE HOOD OPERATION - ELECTRONIC CONTROLS
Applies to follwoing models:
Turin Bellisimo (TU11212)
Turin Casino (TU004Z)
Turin Express II (TU18811)
Turin La Bella (TU18825)
Turin Linosa (TU19260)
Turin Malibu (TU13238)
Turin Milano (TU18803)
Turin Trinity (EN19163)
Turin Verona (TU2003
Button functions:
• Power: Power ON/OFF the range hood and activate power-off delay timer.
• Decrease Value: Blower (motor) speed decrease, timer value decrease, and enter timer mode.
• Increase Value: Blower (motor) speed increase timer value increase, and cumulative timer reset.
• Blower Power Indicator: Lights up when blower (motor) is running.
• Blower Speed Indicator: Shows current blower (motor) speed (1-4).
• Light Power Indicator: Lights up when lights turned on.
• Light: Turns ON/OFF
• Power-On Elapsed Digital Timer: Indicates the accumulated time the system is running.
• Power-Off Delay Digital Timer: Indicates the length of time left for delay off function.
• Power-Off Delay Timer Indicator: Lights up when auto-shutdown delay timer function is on.
• Automatic cleaning reminder:
• This range hood is equipped with a cleaning reminder that will activate following 30 hours of use. When
blower (motor) starts to rotate, cumulative running time will be shown in Power-On Elapsed Digital Timer. This
timer icon flashes when 30 hours is up and reminds user to clean the filter(s).
• After cleaning the filter(s) and when the motor is not in use, press and hold Increase Value button over 3
seconds to reset the timer. Please note that turning off the system will not reset the Power-On Elapsed Digital
Timer.
• Adjusting the blower (motor) speed:
• Press Power button once to turn on the system. The Blower Power Indicator icon flashes showing that the
blower (motor) is ready. Decrease Value button will decrease the speed of the blower (motor) from 4 to
1(strongest to quietest). Increase Value button will increase the speed of the blower (motor) from 1 to 4
(quietest to strongest).
• Press Power button once to turn off the system.
• Adjusting the timer function:
• While the blower (motor) is not running : Press and hold Decrease Value button over 3 seconds to enter
timer mode. Adjust to desired period of delay off timer by pressing Increase Value or Decrease Value button
(minimum 1 minute to maximum 15 minutes). This setting will be saved immediately.
• While the blower (motor) is running : Press and hold Power button for over 3 seconds to activate delay off
timer. Power-off delay indicator will lit up and power-off delay digital timer will begin to countdown, when it
reaches zero, the blower (motor) will shut down.
• Adjusting the light:
• Press Light button once to turn on the lights, and once again to turn off the lights.
• Note: Light settings are independent from other settings (including power-off delay) and lights must be
manually turned on or off.
Note: The system saves user configurations, settings such as timer and blower (motor) speed will remain the same the
next time it is turned on.
12
Power
Decrease Value Blower
Power Indicator Blower
Speed Indicator Light
Power Indicator
Light
Increase Value
Power-On Elapsed Digital Timer
Power-Off Delay Digital Timer
Power-Off Delay Timer Indicator