Table Des Matières; About This Manual; Symbols; Safety Warnings - Festool OF 1010 REQ-F Notice D'utilisation

English
Contents
1 About this manual....................................... 6
2 Symbols....................................................... 6
3 Safety warnings...........................................6
4 Intended use................................................9
5 Technical data............................................. 9
6 Functional description................................ 9
7 Commissioning........................................... 9
8 Settings......................................................10
9 Working with the electric power tool........12
10 Service and maintenance..........................15
11 Accessories............................................... 15
12 Environment.............................................. 16
1

About this manual

Save these instructions
It is important for you to read and understand
this manual. The information it contains relates
to protecting your safety and preventing prob­
lems. The symbols below are used to help you
recognize this information.
DANGER Description of imminent
hazard and failure to avoid
hazard will result in death.
WARN­ Description of hazard and
ING possible resulting injures
or death.
CAUTION Description of hazard and
possible resulting injuries.
NOTICE Description of possible
damage of the device or its
surroundings.
2

Symbols

Warning of general danger
Warning of electric shock
Read the operating instructions and
safety instructions.
Wear ear protection.
Wear protective gloves when changing
tools and working with raw materials.
Wear a dust mask.
Wear protective goggles.
6
Pull out the mains plug
Safety class II
Tip or advice
Handling instruction
Disconnecting the mains power cable
Connecting the mains power cable
V Volt
A Ampere
Hz Hertz
W Watt
~ Alternating current
n
no load speed
0
rpm
revolutions per minute
min -1
tr/mn
kg kilogram
lb. pound
" Inch
mm millimetre
3

Safety warnings

3.1 General power tool safety warnings
WARNING! Read all safety warnings, in­
structions, illustrations and specifica­
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1 WORK AREA SAFETY
Keep work area clean and well lit. Clut­
a.
tered or dark areas invite accidents.
Do not operate power tools in explosive
b.
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the
dust or fumes.