Safety Instructions; Technical Data - Kortel Design Krisis Karré 100 Mode D'emploi

Rev. 5

2. Safety instructions

This reserve parachute must not be used for skydiving!
The Kortel Design Krisis Karre is certified according to the german and european
standards LTF 35/03 and EN 12491. The use of this rescue system is at your own risk.
The manufacturer cannot be held liable for any personal injury or material damage
related to the use of this reserve system.
The correct installation of the reserve parachute on the harness is essential and a
compatibility test must be conducted by a competent person. Only a properly installed
rescue system will function as intended and thus contribute to safety.

3. Technical data

Krisis Karré
Surface
Line length incl. risers
Centre line length incl.
risers
Number of lines/panels
Number of centre lines
Overall length
Max. load EN/LTF
Min. recommended load
Sink rate at max. load
Volume in ccm
Type certificate no.
Weight
Manufacturer:
1096 avenue André Lasquin - 74700 Sallanches - France
100
25,2 m
2
6,10 - 6,42 m
6,63 - 6,71 m
18/16
5/2
7,45 m
100 kg
50 kg
4,6 m/s
3900
EP 208.2018
1,17 kg
Kortel Design – Air MKG
Tel: +33(0)9.50.10.73.27 - info@korteldesign.com
www.korteldesign.com
125 160
30,7 m² 41,0 m²
6,86 - 7,22 m 6,86 - 7,25 m
7,27 - 7,37 m 7,37 - 7,47 m
18/16 22/20
5/2 8/2
8,25 m 8,50 m
125 kg 160 kg
60 kg 80 kg
4,5 m/s 4,8 m/s
4700 5300
EP 209.2018 EP 210.2018
1,39 kg 1,78 kg
25
04/2021
220
59,2 m²
7,50 - 7,80 m
7,75 - 7,92 m
26/24
9/2
9,00 m
220 kg
100 kg
4,6 m/s
7300
EP 211.2018
2,57 kg