Step 4 : Connecting Hdmi/Dvi To A Tv; Connecting To A Tv With Hdmi Jack - Samsung DVD-R135 Manuel D'instructions

Step 4 : Connecting HDMI/DVI to a TV

If your TV has a HDMI/DVI input, connect HDMI/DVI cable to a TV. You will enjoy the best quality images and sounds.

Connecting to a TV with HDMI Jack

Using the HDMI- HDMI cable connect the HDMI OUT jack on the rear of the DVD Recorder to the HDMI IN jack of
your TV.
Press the input selector on your TV remote control until the HDMI signal from the DVD Recorder appears on your TV
screen.
To watch through the HDMI output, set the digital
s
audio output to PCM.(See page 34~35)
Caution
Depending on the HDMI device(TV/HDMI Receiver)
s
you use, audio may not be supported. If TV does
not support Dolby digital/DTS, Audio output is not
available when you set Digital output as Bitstream
or select DTS On in Audio setup menu. In this case,
set the digital audio ouput to PCM or DTS Off.
24 - English
HDMI OUT