auna Roadie Smart Mode D'emploi page 38

EN
Connecting to your Wireless Network
Press and hold the Standby button to turn on the boombox.
It will display as below.
If this is the first use, the Configure Network wizard will be displayed.
Choose yes to start configuring network. Press the left button to highlight
Yes and press enter to confirm.
Select Add/Remove AP from list (AP is the access point), use the  or 
button to scroll and press enter to confirm, and then choose Add AP (Scan):
It will start scanning the available Wi-Fi networks around. Scroll to your
network and press enter to confirm. If your wifi network has a password
protected, it will ask you to enter the passphrase / password.
Here are the steps to enter the password.
Use the / button to scroll through the characters. When the correct one
is highlighted, press the right button to input the next character. When it
comes to the last character of the password and it is highlighted, press the
enter button to confirm.
Note: The password is case sensitive. Please consult with the one who set
up your network if you don't know the password.
When the Wi-Fi connection is successful, the Association Complete will be
shown briefly. It will then display the main menu as follow:
38