Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
For SWW05002TPK, SWW05002VPK, SWW05001VPK, SWW07501VPK,
SWW05001TPK, SWW07501TPK
Before removing pump from basin for service, always disconnect electrical power to pump and control switch.
Submerge pump in a disinfectant solution (bleach) for at least one hour before disassembling pump.
Unscrew the bolts, and remove the volute/gasket.
Use a flathead screwdriver to hold the shaft, then turn the impeller counter clockwise to release the impeller.
Remove debris from around the shaft and on/under the impeller.
Reassemble the pump.
SWW05002TPK/ SWW05002VPK
For SWW07503TPK
Before removing pump from basin for service, always disconnect electrical
power to pump and control switch.
Submerge pump in a disinfectant solution (bleach) for at least one hour
before disassembling pump.
Put the pump upside down.
Note: Pump is oil filled, don't incline the pump to void the oil leakage.
Unscrew the stainless screws, and remove the volute/gasket.
Use a flathead screwdriver to hold the shaft, then turn the impeller
counterclockwise to release the impeller.
Remove debris from around the shaft and on/under the impeller.
Reassemble the pump.
For Professional Technical Support call 1-844-242-2475
SWW05001TPK/SWW05001VPK/SWW07501TPK/SWW07501VPK
7
Publicité
Table des Matières
