Jenn-Air Attrezzi JBL800 Guide De L'utilisateur page 9

All manuals and user guides at all-guides.com
Ice Crushing Mode
1. Load ice cubes in the blender pitcher, making sure to use ice that
is thoroughly frozen. Break up any large chunks of ice.
2. Touch the "ON" pad on the control panel. The "ON" pad will
illuminate and the WARNING light will flash to indicate that the
blender is ready to operate.
3. Touch the "CRUSH" pad on the control panel. The blender will
automatically operate in short bursts to crush the ice.
4. Once the ice is crushed, touch the "OFF" pad on the control panel.
Using the removable pitcher lid cap
1. While blender is off, remove pitcher lid cap by
holding the pitcher jar and pitcher lid down
with one had and twisting and lifting the
pitcher lid cap with the other hand.
2. Use the small opening in the lid to add
ingredients to the blender while the blender is running. Use
caution and blend on low speed while pitcher lid cap is removed.
Be cautious when blending hot foods, as steam or hot vapor can
burn skin when the lid is removed. Covering the lid cap opening
with a clean cloth prior to blending will allow steam to escape
and prevent splattering.
Use the cap opening in the lid to vent steam or hot
vapor, however be sure to open the lid and/or lid
cap gradually and direct steam or hot vapor away
from hands, face and other exposed skin.
For best results, blend small amounts of hot liquids
and cover the lid cap opening with a clean cloth.
Use the "PULSE" mode beginning on the lowest
speed setting.
CAUTION
8