Jenn-Air Attrezzi JBL800 Guide De L'utilisateur page 3

All manuals and user guides at all-guides.com
facility for examination, repair, electrical or mechanical adjustment.
Call the Jenn-Air Customer Service Center at
1-866-982-3313 for assistance.
7. Using attachments not recommended or sold by the appliance
manufacturer for use with this model, including canning jars or
ordinary jars, is not recommended and may cause fire, electric
shock or injury to persons.
8. Do not use the blender outdoors.
9. Do not let the cord hang over the edge of a table or counter.
Do not let cord contact hot surfaces, including stove.
10. Keep hands and utensils out of pitcher while blending to reduce the
risk of severe injury to persons or damage to the blender. A scraper
may be used but must be used only when the blender is not running.
11. Flashing light indicates ready to operate. Avoid any contact with
blades or moveable parts. When the blender is in the "ON" mode,
and the touch control is illuminated, do not touch the blade
assembly, interfere with blade movement or remove the pitcher lid.
Accidentally touching a speed control may activate the blender.
12. Blades are sharp. Handle carefully.
13. To reduce risk of injury, never place the blade assembly on the
power base without the pitcher properly attached.
14. Always operate blender with the lid in place.
15. Never leave blender unattended while running.
16. Before blending hot liquids, remove pitcher lid cap
from lid. Beware of steam or hot vapor. When
removing the lid, tilt lid slightly to direct steam
away from skin. Place a clean cloth over the lid
cap opening to avoid splattering. Keep hands and
other exposed skin away from opening to prevent
possible burns. Start with slowest speed.
17. Do not use an extension cord with this blender.
To reduce the risk of electrical shock or fire, do not take apart
the blender power base. All repairs must be performed only by
factory authorized personnel.
This product is designed for household use only. Do not use blender
for other than intended purpose.
WARNING
2