Attaching/Removing The 1.4K Teleconverter - Panasonic Lumix H-ES200 Instructions

Note
• When using the lens with the lens hood, check if the lens
hood screw has become loose.
• When taking pictures with the flash with the lens hood
attached, the lower portion of the screen may turn dark
and the control of the flash may be disabled because the
photo flash may be obscured by the lens hood. We
recommend detaching the lens hood.
• When carrying, the lens hood can
be temporarily attached in the
reverse direction.
• Do not carry the lens by holding
only the lens hood.
Attaching/Removing the
1.4k Teleconverter
• The teleconverter can be used in combination with
this lens (H-ES200). (As of November 2017)
• For the most up-to-date information on compatible lenses
other than this lens, check the Panasonic website.
• Do not attach any parts other than a compatible lens.
Doing so may damage the lens or teleconverter or
adversely affect its performance.
• Before attaching or removing the teleconverter, verify
that the digital camera is turned off.
• Remove the lens cap and the lens rear cap.
∫
To attach the teleconverter
1
Align the fitting mark
on the teleconverter with
the lens fitting mark
the lens (1), and rotate the
teleconverter in the arrow
direction until a clicking
sound is heard. (2)
2
Align the lens fitting mark
on the teleconverter with
C
the lens fitting mark
the digital camera (3), and
rotate the lens in the arrow
direction until a clicking
sound is heard. (4)
• When attaching the lens to the digital camera, do not
press the lens release button
button on the teleconverter.
∫
To remove the teleconverter
1
While pressing and
holding the lens release
button on the digital
E
camera, rotate the lens
fitted with the
teleconverter in the arrow
direction until it stops and
remove it (1, 2).
A
on
B


on
D
 
and the lens release
E
DVQX1304


7