Supplied Accessories - Panasonic Lumix H-ES200 Instructions

• To prevent dust and other
particles from accumulating
on or entering the lens,
attach the lens rear cap
when the lens is not in use.
• To protect the lens contact
points 1, do not place the
lens with its mount surface
facing down. In addition, do
not allow the lens contact
points to become dirty.
∫
About Condensation (Fogging of the Lens)
• Condensation occurs when the ambient temperature or
humidity changes. Please be careful, as it may cause the
lens to become dirty and lead to mould and
malfunctioning.
• If condensation occurs, turn the power off and leave it for about
two hours. Once the camera acclimatizes to the surrounding
temperature the condensation will go away naturally.
4
DVQX1304

Supplied Accessories

Product numbers correct as of November 2017. These may
be subject to change.
1 2
SFC0360 DVZE1018Z
1
DMW-TC14
6 7
2
VFC4460
DVXE1027Z
1 Lens Pouch
2 Lens Hood
3 Lens Cap
4 Lens Rear Cap
5 External tripod mount
¢1 The 1.4k Teleconverter (DMW-TC14) is scheduled to
be sold as an optional accessory.
¢2 It is available for purchase as a package that includes a
lens cap and a lens rear cap.
• The lens rear cap and lens cap are attached to the
interchangeable lens and 1.4k Teleconverter at the time
of purchase.
3 4 5
1GE1Z253Z VFC4605
8 9
DVGX1115Z VFC4605
6 1.4k Teleconverter
7 Lens Pouch
8 Lens Cap
9 Lens Rear Cap
SYQ0680