Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
R
E F E R E N C E
Firmware upgrade
Introduction
Samsung will often support the software upgrade to improve the performance of this unit to the latest
status, through Samsung Internet Site (www.samsung.com).
Because the specially new mpeg4 codec continues and it is appearing. What improvements are
made depends on the upgrade software you are using as well as the software that your DVD-player
contained before the upgrade.
How to make an upgrade disc
Write the downloaded file onto a blank CD-R or CD-RW disc, using the following settings:
1
You have to download a new file
through Download Center of
Samsung Internet Site
(www.samsung.com).
2
Write the file to Disc using
CD-RW of your computer.
Upgrade procedure
1
Open the disc tray.
Place the disc on the tray.
Close the tray.
The Firmware upgrade
screen appears.
2
Press the ➛ /❿ buttons to
select Total, then press the
ENTER button.
3
Press the number buttons
to select the desired
language.
Note
- File System CD-ROM ISO Level
- Character set ISO 9660
- Finalized, single session
- Write speed low
Firmware upgrade
appears on the display
Firmware upgrade starts
Note
Press
1 for English
- If the "Select Menu Language" doesn't appear,
Touche
2 pour Français
Drücken Sie
3 für Deutsch
Pulsar
4 para Español
- Do not press any button and unplug the power
Premere
5 per Italiano
Druk op
6 voor Nederlands
- The upgrade procedure may change, refer to
ENG-59
- In the middle of the writing, the tray will open
automatically. After taking out the disc,
please wait for about 2 minutes.
- If the unit was successfully updated, the unit
will turn off and on after closing the tray
automatically. When the unit turns on, this
screen will display.
please contact to "Samsung Service Center".
code during upgrade.
the web site (www.samsung.com).
Publicité
Table des Matières
