General Safety Instructions - HOLZMANN MASCHINEN KAM 535 Mode D'emploi

Symbolbild

12.4 General Safety Instructions

To avoid malfunctions, damage and health hazards when working with the machine, in addition to
the general rules for safe working, the following points in particular must be observed:
 Before commissioning, check the machine for completeness and function. Only use the
machine if the guards and other non-separating guards required for machining are fitted,
are in good operating condition and have been properly maintained.
 Choose a level, vibration-free, non-slip surface for the installation location.
 Ensure sufficient space around the machine!
 Ensure sufficient lighting conditions at the workplace to avoid stroboscopic effects!
 Ensure a clean working environment!
 Only use perfect tools that are free of cracks and other defects (e.g. deformations).
 Remove adjustment tools from the machine before switching it on.
 Keep the area around the machine free of obstacles (e.g. dust, chips, cut workpiece parts
etc.).
 Check the strength of the machine connections before each use.
 Never leave the running machine unattended. The machine must be stopped if it is unat-
tended.
 The machine may only be operated, maintained or repaired by persons who are familiar
with it and who have been informed of the dangers arising in the course of this work.
 Ensure that unauthorised persons maintain a safe distance from the machine and keep
children away from the machine.
 Wear suitable protective equipment (eye protection, dust mask, respiratory protection, ear
protection, gloves when handling tools) as well as close-fitting work protective clothing -
never loose clothing, ties, jewellery, etc. - danger of being drawn in!
 Hide long hair under hair protection.
 Do not remove any sections or other parts of the workpiece from the cutting area while
the machine is running!
 Always work with care and the necessary caution and never use excessive force.
 Do not overload the machine!
 Do not work on the machine if it is tired, not concentrated or under the influence of medi-
cation, alcohol or drugs!
 Do not use the machine in areas where vapours from paints, solvents or flammable liquids
represent a potential danger (danger of fire or explosion!).
 Do not smoke in the immediate vicinity of the machine (fire hazard)!
 Always shut down the machine before carrying out any conversion, adjustment, measur-
ing, cleaning, maintenance or repair work and always disconnect it from the power supply
for maintenance or repair work. Before starting work on the machine, wait until all tools or
machine parts have come to a complete standstill and secure the machine against unin-
tentional restarting.
HOLZMANN MASCHINEN GmbH
 One self-locking EMERGENCY STOP button to stop dangerous
movements at any time.
 Separating protective device (fixed)
 Separating protective device (fixed)
(Access to motor)
www.holzmann-maschinen.at
SAFETY
23
KAM535