How To Clean; Hints And Tips - Deni 2300 Instructions

10. When the timer sounds, if you want the toppings
melted or browned more, set the upper heating element
for an additional 1-2 minutes. If you want the crust
to be crisper, set the lower heating element for an
additional 1-2 minutes.
11. When the cooking time is complete, turn all the controls
to the OFF position, unplug the unit, and lift the lid.
12. Carefully lift the edge of the pizza pan with a spatula
and grip with an oven mitt to remove the pan.
13. Carefully place the pizza onto a cutting surface that is
heat resistant. Never cut the pizza on the pizza pan.
This will damage the pan.

How To Clean

1. Turn all controls to the OFF position and unplug.
2. Completely cool the pizza oven and pan before remov-
ing or attempting to clean.
3. Wash the pizza pan in warm, soapy water. Rinse and
dry. Do not use abrasives.
4. Wipe the pizza oven and cord with a clean damp
cloth. Do not immerse the pizza oven in water or any
other liquid.
5. Dry all parts thoroughly before storing.
4
All manuals and user guides at all-guides.com

Hints and Tips

I
Rising crust pizzas - over cooking a pizza may cause
the rising crust to touch the upper heating element. This
may cause the crust and toppings to scorch. Rising crust
pizzas must be carefully watched to prevent this from
happening.
I
When making a fresh dough pizza, always oil the
pizza pan with vegetable oil or cooking spray to
prevent the dough from sticking.
I
The largest crust the pizza oven will accommodate is 11
inches. Be sure that the crust does not hang over the
edge of the pizza pan. If the crust touches the sides of
the cover the pizza pan will not turn and the pizza will
not cook. (Trim or cut your pizza so that it fits properly
on the pan.)