Delivery Content; Assembly - Zipper Maschinen ZI-MOS4TA Manuel D'utilisation

12

ASSEMBLY

12.1 Delivery content

Please check the product contents immediately after receipt for any eventual transport damage
or missing parts. Claims from transport damage or missing parts must be placed immediately
after initial machine receipt and unpacking before putting the machine into operation.
12.2 Assembly
The machine comes partly assembled and the components that have been disassembled for
transport must be assembled as described below and the fuel and engine oil must be filled.
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-MOS4TA
INHALT / INDEX / INDICE/
Assemble handles
Insert the handle (1) and handle (2) into
the holder (3) and fix them to the machine
with the four screws (4)
Fixing the cable/rope pull
Fix cable/rope (2) in clamp (1) and fix clamp
(1) on rod
Connecting the rod
Put the two parts (1) and (2) of the rod
together and connect them by means of the
bolt (4) and handle (3)
Assembly nylon cutter blade
Assemble the nylon cutter blade (1) onto the
guard (3) with two screws.
23