Cleaning And Care; Rectifying Faults - Beurer medical BC 60 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 25
• If you press the memory buttons again, further individual
measurements appear with WHO, cardiac arrythmia and
HSD. These individual values are numbered from 1 to 60.
The time and date are alternately displayed after 2.5 sec-
onds.
• If there are 60 individual values in the memory at the same
time, the oldest value is deleted in order to make room for
the new value.
• Use the start/stop button
will turn off automatically after approx. 30 seconds.
Tip: You can also use the 2 user memories to separately
store measurements – e.g. mornings and evenings.
Deleting stored values
To delete an entire user memory, you have to select the rel-
evant user memory. The average is displayed and denoted
with the letter "A". Press and hold memory button M1 or M2
until the display flashes and keep pressing the button until
the display completely switches off.

7. Cleaning and care

• Clean your blood pressure computer carefully using only a
slightly moistened cloth.
• Do not use any detergents or solvents.
• Never hold the instrument under water as otherwise liquid
can penetrate and damage the instrument.
• Never place any heavy objects on the instrument.
All manuals and user guides at all-guides.com
to turn off the device, or it

8. Rectifying faults

Error messages can occur when
• you move or talk during the measurement (ERR 1),
• inflation takes longer than 20 seconds (ERR 2),
• device has not been inflated sufficiently despite reinflation
(ERR 2),
• the inflation pressure is higher than 300 mmHg (ERR 300),
• the batteries are almost empty
In such cases, repeat the measurement. Ensure you do not
move or speak.
If necessary, re-insert or replace the batteries.
9. Specifications
Model No.
BC 60
Method of
Oscillating, non-invasive blood pressure
Measurement
measurement on the wrist
Range of
Pressure 0 – 300 mmHg,
Measurement
pulse 40 – 160 beats/minute
Accuracy of the
systolic ± 3 mmHg / diastolic ± 3 mmHg /
pressure reading
pulse ± 5 % of the displayed value
Measuring
max. permissible standard deviation
uncertainty
according to clinical testing:
systolic: 8 mmHg / diastolic: 8 mmHg
Sets of Memory
2 x 60 memory places
Unit Dimension
L 72 x W 80 x H 28.7 mm
Unit Weight
Approx. 140 g
19
.

Publicité

Table des Matières
loading

Table des Matières