Breville the Infuser Livret D'instructions page 30

All manuals and user guides at all-guides.com
TROUBLESHOOTING PAGE HEADER.....
PROBLEM
No steam
Coffee not hot
enough.
30
POSSIBLE CAUSES
• Machine has not reached
operating temperature.
• Water tank is empty.
• Water tank is not fully
inserted and locked into
position.
• Machine needs to be
decalcified.
• Steam wand is blocked.
• STEAM/HOT WATER
dial is not in the
STEAM position.
• Cups not pre-heated.
• Portafilter not pre-
heated.
• Milk not hot enough
(if making a cappuccino
or latté etc).
• Machine needs to be
decalcified.
WHAT TO DO
Allow time for the machine to
reach operating temperature.
The STEAM/HOT WATER
light will flash to indicate the
machine is heating to create
steam. During this time,
condensed water may purge
from the steam wand. This is
normal. When the STEAM/
HOT WATER light stops
flashing the steam wand is
ready for use.
Fill tank.
Push water tank down
completely to lock into place.
Refer to "Decalcifying",
page 24.
Refer to "Cleaning the Steam
Wand", page 25.
Ensure the STEAM/HOT
WATER dial is completely
rotated to the STEAM position.
Rinse cups under hot water
outlet and place on cup
warming tray.
Rinse portafilter under hot
water outlet. Dry thoroughly.
Heat milk until base of the jug
becomes hot to touch.
Refer to "Decalcifying",
page 24.