Table des Matières
Publicité
en
Care and daily c leaning
Working with the glass blender jug
X Fig. D
1. Hold the blade insert by the plastic
ring and insert it – blade first – into the
blender jug. Turn the blade insert anti-
clockwise until it audibly clicks into place.
2. Turn the blender jug over.
3. Insert the blender jug into its recess on
the motor block and turn it clockwise
until it audibly clicks into place.
4. Put the desired ingredients into the
blender jug.
5. Put the lid and locking cap in place.
6. Plug the mains plug into the mains.
7. Hold the lid firmly with one hand, but
don't place your hand over the filling
opening. Hold down the t or u button
until the mixture has reached the
desired consistency.
8. Release the button and wait until the
appliance comes to rest. Disconnect the
mains plug.
9. Turn the blender jug anti-clockwise and
then remove it.
10. Remove the lid.
11. Pour the blended food into another
container.
12. Turn the blade insert clockwise and then
remove it.
Caution!
Never set the blade insert down with the
blade underneath. This could damage
the blade and scratch your work surface.
X Fig. B
Clean all the parts. X "Care and daily
cleaning" see page 14
Adding more ingredients
X Fig. E
1. Release the button and wait until the
appliance comes to rest.
2. Remove the locking cap or the entire lid.
3. Add the extra ingredients.
4. Replace the lid and the locking cap, and
again hold down the t or u button.
Note: you can remove the locking cap by
turning it anticlockwise.
14
All manuals and user guides at all-guides.com
Care and daily cleaning
The appliance and all the attachments
and accessories used must be thoroughly
cleaned after each use.
W Risk of electric shock!
– Unplug the appliance before cleaning it.
– Never immerse the base unit in liquids
– Do not use a steam cleaner.
W Risk of injury!
Do not touch the blender blades with your
bare hands.
Caution!
– Do not use any cleaning agents
– Do not use any sharp, pointed or metal
– Do not use abrasive cloths or cleaning
Notes:
– It is best to clean the parts immediately
– Pour a little water and washing-up liquid
– The plastic parts may become dis-
In Fig. F you will find a summary of how to
clean the individual parts.
Base unit
Wipe the outside of the base unit with a
soft, damp cloth and dry off.
Blade holder
Remove the seal before cleaning. Only clean
the blade holder with a brush under running
water. Don't leave it soaking in water!
Blender jugs and lids
You can clean the blender jugs and other
parts with a detergent solution and a
soft cloth or sponge, or put them in the
dishwasher.
and do not clean in the dishwasher.
c ontaining alcohol or spirits.
objects.
agents.
after use. This will prevent residues from
drying on and possibly attacking the
plastic (e.g. essential oils in herbs).
into the empty blender jug and hold
down button u for a few seconds.
coloured when you process certain ingre-
dients, such as carrots, but this can be
removed with a few drops of cooking oil.
Publicité
Table des Matières
