Table des Matières
Publicité
6.
Drill the outer top two pilot holes (into the drywall) using a 3/8 in. (10 mm) diameter drill bit.
IMPORTANT
: Pilot holes must be drilled to a depth of 1 in. (25 mm).
7.
Remove the wall plate template
CAUTION:
Be sure the anchors
6
10
16
and insert two anchors
14
10
are seated flush with the drywall surface.
14
1 in. (25 mm)
3/8 in.
(10 mm)
into the outer top holes (into the drywall).
7
14
10
Publicité
Table des Matières
