Troubleshooting; Troubles And Solutions; Specifications - Sony BRAVIA Guide De Référence

Troubleshooting

When the LED indicator is flashing red, count
how many times it flashes (interval time is
three seconds).
If the LED indicator flashes red, reset the TV by
disconnecting the mains lead from the TV for
two minutes, then turn on the TV.
If the problem persists, contact your dealer or
Sony service centre with the number of times
the LED indicator flashes red (interval time is
three seconds). Press  on the TV to turn it off,
disconnect the mains lead, and inform your
dealer or Sony service centre.

Troubles and Solutions

No picture (screen is dark) and no sound
• Check the antenna (aerial)/cable connection.
• Connect the TV to the mains socket, and press 
on the TV or the remote control.
Picture contours are distorted
• Change the current setting of [Film Mode]* to
other settings.
The TV turns off automatically (the TV enters
standby mode)
• Check if the [Sleep Timer]* is activated.
• Check if the [Duration]* is activated by [On Timer]*
or [Photo Frame Settings]*.
• Check if the [Idle TV Standby]* is activated.
Some input sources cannot be selected
• Select [AV Preset]* and select [Always]* of the
input source.
Some programmes cannot be tuned
• Check the antenna (aerial)/cable connection.
The remote control does not function
• Replace the batteries.
The TV surrounds become warm
• When the TV is used for an extended period, the
TV surrounds become warm. You may feel hot
when touching there by the hand.
* For more detailed information, press HOME on the
remote control, then select [Help Guide] under
[Settings] menu.
12
GB

Specifications

System
Panel system
LCD (Liquid Crystal Display) Panel, LED Backlight
TV system
Depending on your country/area selection/TV
model
Analogue: B/G, D/K, I
Digital: DVB-T/DVB-C
1
DVB-T2*
1
Satellite* : DVB-S/DVB-S2
Colour/video system
Analogue: PAL/SECAM/NTSC3.58 (Video only)/
NTSC4.43 (Video only)
Digital: MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC
MP/HP@L5.0, H.265/HEVC MP/Main10@L5.1 (4K
60fps)
Channel coverage
Depending on your country/area selection/TV
model
Analogue: UHF/VHF/Cable
Digital: UHF/VHF/Cable
1
Satellite* : IF Frequency 950-2,150 MHz
Sound output
10 W + 10 W
Wireless technology
Protocol IEEE 802.11b/g/n
Frequency band(s)
Wireless LAN (IEEE 802.11b/g/n)
Frequency range
2400-2483.5 MHz
Software version
This radio equipment is intended to be used with
the approved version(s) of software that are
indicated in the EU Declaration of Conformity.
Refer to [Customer Support] under [Settings]
menu.
The software loaded on this radio equipment is
verified to comply with the essential requirements
of the Directive 2014/53/EU.
Input/Output jacks
Antenna (aerial)/cable
75 ohm external terminal for VHF/UHF
1
Satellite antenna*
Female F Type Connector, 75 ohm.
DiSEqC 1.0, LNB 13 V/18 V & 22 kHz tone, Single
Cable Distribution EN50494.
Output Power
< 20.0 dBm