Disposal Of Packaging Materials; Location Requirements - AEG MC 4429 CD Mode D'emploi

All manuals and user guides at all-guides.com
English
144
Scope of Delivery and Inspection
for Transport Damage

Disposal of Packaging Materials

Location Requirements

The device is supplied with the following accessories and components:
■
Music Center
■
Speakers (2x)
■
Remote control
■
Drilling template
■
Fasteners for wall mounting
■
Stand for Music Center (2) with fastening screws
■
Stand for speakers (2x) with fastening screws
■
AM loop antenna
■
User manual
NOTE
►
Check the contents for completeness and visible damage.
►
In case of transport damage please contact your dealer directly.
The packaging materials protect the device from transport damage. The
packaging materials are selected under environmentally friendly and
disposal aspects and are recyclable.
Recycling of packaging materials saves natural resources and reduces
the waste. Dispose of unwanted packaging materials according to local
regulations.
NOTE
►
Keep the original packaging during the warranty period to pack-
age the device properly in case of warranty claim.
For safe and trouble-free operation the location of the device must meet
the following requirements:
■
Place the device on a solid, level and flat surface or wall-mount the
device.
■
Keep sufficient space (min. 20cm) above the device to open the CD
drive.
■
Do not use the device in extremely hot, damp or humid locations or
in close proximity to inflammable materials.
■
The wall outlet must be easily accessible at all times to disconnect
the cable from the mains power supply in case of emergency.
■
Install the device in such way that no air vents are blocked.