AEG MC 4429 CD Mode D'emploi page 149

All manuals and user guides at all-guides.com
Settings
Set Current Time
‹
Turn the device off.
‹
Press and hold MEM/CLK-ADJ (13), until the display shows the
time format (24H or 12H).
‹
TUNE+/
Press (15) or
24-hour (24H) and 12-hour display format (12H). Press MEM/CLK-
ADJ (13), the hour display flashes.
NOTE
►
For 12-hour display format the current time is displayed with
or PM.
‹
Press TUNE+/ (15) or
Press MEM/CLK-ADJ (13) to confirm; the minute display flashes.
‹
Press TUNE+/ (15) or
Press MEM/CLK-ADJ (13) to save the current time.
NOTE
►
Power failure or disconnecting the device from mains power sup-
ply resets the current time to 00:00.
Set Volume
‹
VOL + (10) or VOL - (4) to set the desired volume.
Press
Range: 0 (sound muted) to 30 (max. volume).
Set Alarm
NOTE
►
If you press no button for 10 seconds during alarm setting, then
the alarm is activated with the current settings and the device
returns to the previous mode.
You can set 2 different alarm times.
■
ALARM 1:
At the set time the device turns on and starts playback
of the selected source at the selected volume level. If the corre-
sponding source is not inserted or connected the buzzer sounds.
■
ALARM 2: At the set time the device sounds the buzzer with
volume level 20.
English
/TUNE- (21) to toggle between
/TUNE- (21) to set the hours.
/TUNE- (21) to set the minutes.
149
AM