Check Operation - Kohler K-4000 Guide D'installation Et D'entretien

4. Check Operation

Turn the water supply back on and allow the tank to fill.
Check for leaks.
NOTE: To prevent accidental flushes, the sensor remains inactive
for 10 seconds after each flush.
Flush the toilet repeatedly using the module.
Observe the canister.
Ensure the bracket is positioned between the location marks.
Ensure that the canister fully closes when the flush is complete.
Observe the movement of the wheel.
Ensure that the wheel does not come into contact with anything
when rotating.
1224637-2-E 6 Kohler Co.