Samsung BD-E6500 Mode D'emploi page 23

All manuals and user guides at all-guides.com
Network
Soft Ap
AllShare Settings
device Name
Bd-Live Settings
System
Initial Settings
pass Through HdMI
IN 1
Quick Start
Anynet+(HdMI-CEC)
Lets you connect other types of Wi-Fi devices to the
player wirelessly. Requires that you create a security key
which you must enter into the other Wi-Fi devices when
you are connecting them to the network.
Lists network connected AllShare devices and lets you
control whether each device (a smartphone, a tablet,
etc.) can share content with or control the player.
Lets you input a name for the player that will identify it
on your networks.
Set various BD-Live function. BD-Live allows you to
access extra features available on some Blu-ray Discs if
you are connected to the Internet.
 Bd-Live Internet Connection : Lets you fully allow,
partly allow, or prohibit a BD-Live Internet connection.
 Bd data Management : Manage BD data
downloaded from a BD-Live service or Blu-ray Disc.
Lets you re-run the Initial Settings procedure.
Lets you allow the signal from a device connected to
HDMI IN 1 to pass through this player when it is in
standby mode. You can play the source on your TV
without turning on the player.
| NOTE |
\ Standby power consumption slightly increases if the Pass
Through HDMI IN 1 is enabled.
Lets you set the player to turn on quickly by decreasing
the boot time.
| NOTE |
\ If this function set to On, Standby power consumption will be
increased.
Anynet+ is a convenient function that offers linked
operations with other Samsung players that have the
Anynet+ feature and lets you control those products
with one Samsung TV remote. To operate this function,
you must connect this player to an Anynet+ Samsung
TV using an HDMI cable.
23
|
English