Video Recorder Key; Tips - Philips 21PT4355/00 Mode D'emploi

Video recorder key

Tips

Poor reception or no picture
The proximity of mountains or high
buildings can cause ghost pictures, echoing
or shadows. If this is the case, try tuning the
picture using
FINE TUNE
Do you have the right system (p. 4)?
Check that the aerial plug or euro c o n n e c t o r
plug is properly connected.
Check also that your aerial is capable of
receiving broadcasts in this frequency range
( UHF or VHF ).
Adjusting the picture
If the picture is out of focus, or if you are
having difficulties finding the right settings,
select one of the Smart picture controls
( p. 7) and store it using the
setting (p.5).
In case of bad reception (fuzzy picture), set
the NOISE RED
The picture is in black and white
To read a video cassette, check that it is
10
The key, on the side of the remote control, controls the main functions
of the video recorder.This key is only available on the remote control shown
opposite.
For the following commands, press
standby,
/
enter a number,
bring up the video recorder menu*,
select*,
set*,
confirm*.
OK
select programme,
P
v
record,
s
rewind,
u
stop,
q
play,
r
fast forward,
G
programming*,
• Some programming features are not available on all video recorders (cursors,
menu, OK key, etc.).
The video recorder is compatible with our own-brand video recorders as well as with
all the models using the RC5 standard.
(p. 4).
P E R S O N A L
to ON : p. 5.
and:
recorded in the same format as that of the
video recorder (
PAL
No sound
If certain programmes have a picture but
no sound, this is because you do not have
the correct TV system (see p. 4).
Standby
When you switch on the set, if it remains
in standby mode and the
is displayed, this means that the
function is activated (p. 5).
The set switches automatically to standby if it
re c e i ves no signals for a period of 15 minu t e s .
When it is in standby mode, the set uses
energy.To save electricity, we advise you to
switch it off using the on-off button.
Still having problems?
If the set breaks down, never try to repair
it yourself. Consult your after-sales service
department instead.
, or ).
SECAM NTSC
message
LOCKED
LOCK