Record Power CamVac Serie Mode D'emploi page 12

7. Assembly
Place the paper motor filter bag over the cloth motor filter bag as shown in
Fig 7.6 and secure in place using the rubber band.
Refit the head to the machine and secure in place with the 3 retaining clips.
Installing the CGV286-3-WALL Wall-Mounted Extractor
Attach the mounting bracket to the wall using suitable fixings (not supplied)
and ensure it is oriented as shown in Fig 7.7 so the mounting holes are at
the bottom.
The mounting bracket sits inside the mounting plate on the back of the
machine, Fig 7.8.
To install the machine to the wall place the mounting plate over the
mounting bracket as shown in Fig 7.9.
To complete assembly and installation of the wall mounted models attach the
waste collection bag to the outside of the cage and secure in place with the
elasticated cord as shown in Fig 7.10.
12
Fig 7.6
Fig 7.7
Fig 7.8
Fig 7.9
Fig 7.10
Wall