Work Safety; Personal Protective Equipment (Ppe); Environmental Protection - Heidolph Hei-FLOW Core Notice D'instructions

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Safety

Work safety

Always use the prescribed personal protective equipment (PPE) such as protective
clothing, safety goggles, protective gloves, safety shoes, etc.
Do not operate any other devices in the immediate vicinity of the device ...
which can generate electromagnetic fields in the frequency range between
9 × 10
Hz to 3 × 10
3
which generate emission or radiation sources in the frequency range
3 × 10
Hz to 3 × 10
11
1,000 μm to 0,1 μm),
which generate ultrasonic or ionizing waves.
Do not operate the unit when adiabatic compression or shock waves may occur
(pressure wave ignition).
Do not use substances that could release energy in an uncontrolled way
(exothermic reaction, spontaneous ignition of dusts).
Route all cables free of kinks and outside the operating and hazardous area.
Avoid excessive pressure on the device display.
Avoid fluid accumulation on the device.
Keep the base unit dry during operation.
Ensure adequate safety distance: Do not store objects in the working and
hazardous area of the device during operation.

Personal protective equipment (PPE)

The operator must determine and provide the necessary PPE, depending on the respec-
tive application and the media and chemicals used.
The corresponding instruction of the personnel is solely within the operator's
responsibility.

Environmental protection

When processing environmentally hazardous substances, take appropriate measures to
avoid risks to the environment.
The evaluation of corresponding measures such as the marking of a hazardous area,
their implementation, and the training of the responsible personnel is the sole responsi-
bility of the operator!
Biohazard
When processing biohazardous substances, take appropriate measures to prevent
hazards to persons and the environment, including:
Instruction of the personnel regarding the necessary safety measures.
Provision of personal protective equipment (PPE) and instruction of the personnel in
its use.
Marking of the device with a biohazard warning symbol.
The evaluation of corresponding measures such as the marking of a hazardous area,
their implementation, and the training of the responsible personnel is the sole responsi-
bility of the operator!
Hz,
11
Hz (in the optical spectral range wavelengths from
15
58

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Hei-flow expertHei-flow ultimate

Table des Matières