General Safety Information; Electrical Safety; Operational Safety - Heidolph Hei-FLOW Core Notice D'instructions

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Safety
Safety

General safety information

Before commissioning and using the device, familiarize yourself with all the safety
regulations and guidelines for occupational safety applicable at the place of use and
observe them at all times.
Only operate the device if it is in perfect technical condition. In particular, ensure
that there is no visible damage on the device itself and, where necessary, on
connected devices or the supply connections.
If there is missing or misleading information on the device or on occupational
safety, contact the responsible safety specialist or our technical service.
Only use the device in accordance with the regulations for intended use („Intended
use" auf Seite 55).

Electrical safety

Ensure that the voltage indicated on the rating plate matches the supply voltage of
the country in which the device is being used.
Ensure that the power supply circuit provided is protected by means of a residu-
al-current device (RCD).
Always use the supplied power supply cord provided with the device (phase,
neutral, ground).
Prior to use, check that the device and the power supply cord are free of visible
damage.
Have repairs and/or maintenance work on the device carried out exclusively by an
authorized and skilled electrician or by the technical service department of Heidolph
Instruments.
Always switch off and disconnect the device from the power supply before carrying
out maintenance work, cleaning, or repairs.

Operational safety

Operate the device under a closed ventilated fume hood when working with poten-
tially hazardous substances (see EN 14175 and DIN 12924).
Do not make any unauthorized changes or modifications to the device!
Only use genuine spare parts and accessories, or those expressly approved by the
manufacturer!
Rectify malfunctions or faults on the device immediately. Switch off and disconnect
the device from the power supply, preventing reconnection, if it is not possible to
eliminate the malfunction or rectify the fault immediately.
Observe all other applicable regulations such as laboratory and workplace guide-
lines, recognized safety technology rules and special local regulations.
57

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Hei-flow expertHei-flow ultimate

Table des Matières