Jenn-Air JGS8850 Instructions Pour L'installation page 18

Masquer les pouces Voir aussi pour JGS8850:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

10. Unscrew the regulator cap and remove the plastic cover.
A. Plastic cover
B. Regulator cap
11. Flip the regulator cap over and replace the plastic cover.
A
A. LP gas position
B. Natural gas position
C. Plastic cover
12. Screw the regulator cap securely back into place. Do not
overtighten.
To Convert Oven Bake Burner
1. Locate the oven orifice hood from the front of the range.
2. Using an adjustable wrench, turn the Number .0512 LP gas
oven bake burner orifice hood counterclockwise to remove.
A. Number .0512 LP gas oven bake burner orifice hood
18
All manuals and user guides at all-guides.com
A
B
B
C
2
.0512
A
3. Install the Number 49 Natural gas oven bake burner orifice
hood, turning it clockwise 4 or 5 turns. Do not overtighten.
A. Number 49 Natural gas oven bake burner orifice hood
4. Position the oven bake burner over the oven bake burner
orifice hood and reinstall using 2 screws.
A. Oven bake burner
B. Oven bake burner orifice hood
5. Reinstall access panel and oven bake burner cover.
To Convert Oven Broil Burner
1. Remove oven broil burner screw and set aside.
2. Remove the oven broil burner from the oven broil burner
orifice hood. The oven broil burner will hang in the back of the
oven while changing the orifice hood.
B
A. Oven broil burner screw
B. Oven broil burner orifice hood
49
A
A
B
A

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Jgs8860Jgs8750

Table des Matières