Marquant 880-138 Mode D'emploi page 39

Measuring
Follow the instructions below to obtain the most accurate results.
1. Sit comfortably at a table. Allow the arm to rest on the table.
2. Relax for 5 to 10 minutes before measuring.
3. Place the blood pressure sleeve level with the heart.
4. Sit still and quietly until the measurement is completed.
5. Do not take measurements immediately after exercising or a bath. Rest for 20–30 minutes before
measuring.
6. Measure your blood pressure at about the same time each day.
Blood pressure measuring
1. Put on the wrist sleeve as explained above.
2. Press the power switch. All the icons are
shown on the display for 2 seconds, after
which 0 or the last measurement result is
shown.
3. Start the measurement. The sleeve inflates
automatically. The marking ( ) is shown on
the display. The measurement result is
shown when the measurement is complete.
Displaying memory items
Press the MEM button. The last saved memory item is displayed. Browse up with MEM button, or down
with the SET button.
When the unit is switched off you can press the MEM button to show the last measurement result.
Emptying the memory
To empty the memory, press the MEM button for 5
seconds. No is shown in the display to indicate
that all memory items have been deleted.
ENGLISH
39