Energy Saving; Cleaning And Care - Electrolux EHE 642 X Instructions De Montage Et Mode D'emploi

Energy saving

2
Always place cookware on the hotplate
before it is switched on.
2
If possible, always place lids on the pans.
2
Switch hotplates off before the end of the
cooking time, to take advantage of resid-
ual heat.
2
Bottom of pans and hotplate should be
the same size.

Cleaning and Care

1
Take care! Risk of burns from residual heat.
Let the appliance cool down.
Cleaning the appliance after each use
1. Wipe the appliance with a damp cloth and a little washing up liquid.
2. Rub the appliance dry using a clean cloth.
Removing deposits
1. Remove heavy deposits from the hotplates using fine scouring powder or
a scouring pad.
2. Wipe off residues with a damp cloth.
3. Then heat the hotplate to a low temperature and leave to dry.
4. To maintain the hotplates, rub in a little sewing machine oil now and again
and then polish off with absorbent paper.
1
Important: Do not clean the stainless steel edge of the hob with scouring
powder or a scouring pad as this will leave scratches!
For stainless steel hobs only use suitable stainless steel cleaning and main-
tenance products. Please the manufacturer's instructions.
3
The stainless steel edge of the plate can be slightly discoloured as a result
of thermal load. This process is caused by the physical properties.
12