How To Use (When Using Macintosh) - Sony MSAC-US70 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

How to Use (When Using Macintosh)

You can use the driver provided as a standard feature of the OS.
Operate as described in the following.
This unit can be used on your computer.
1
Turn on your computer.
2
Insert "Memory Stick" to this unit and connect the USB jack on
this unit with a USB jack on the computer main unit using the
special USB cable supplied.
See pages 25 for how to connect this unit and your computer.
3
Driver installation starts automatically and the driver is
installed on the computer.
4
When driver installation is completed, a Memory Stick icon
appears on the desktop and this unit can now be used.
PNote
Memory Stick icon is not displayed on the desktop when "Memory Stick" is not
inserted to this unit.
Removing this unit from your computer or removing
"Memory Stick" from this unit.
1
Close the software used by this unit.
2
Confirm that the access lamp is off.
3
Drag the Memory Stick icon to the Trash icon.
Alternatively, place the Memory Stick icon in the selected state and
select "Eject" from the "Special" menu in the upper left of the screen.
4
Remove this unit from your computer or remove "Memory
Stick" from this unit.
PNotes
• Do not remove the "Memory Stick" from this unit while the access lamp is
blinking. Data on the "Memory Stick" could be corrupted.
• Removing this unit or the "Memory Stick" in this unit without performing the
operations above may cause damage to the "Memory Stick." Sony will not be
liable for any damage caused as a result of not following the instructions
above.
36-GB
All manuals and user guides at all-guides.com

Publicité

Chapitres

Table des Matières
loading

Table des Matières