How To Use; For Windows - Sony MSAC-US1 Mode D'emploi

BHow to use

For Windows

First, you must install the USB driver software in the package on the
personal computer you are using. Follow the procedure below to install
the USB driver software.
Installation
The screens shown in the following procedure are examples. Actual
screens differ according to the OS.
– For Windows Me –
You can use this unit without using the USB driver (supplied).
Follow the procedure below.
Insert "Memory Stick" into the unit, and connect the USB jack on
the personal computer to the USB jack on this unit using the
specified USB cable (supplied).
The "Memory Stick" driver software installation starts automatically.
– For Windows 98/98SE/2000 –
If you are using Windows 2000, you must log in using administrator's
privileges.
1
Turn on your machine to start up Windows, and insert the
USB driver software CD-ROM (supplied) into the CD-ROM
drive.
2
Open "My Computer."
3
Open the CD-ROM drive (Sony USB Driver (ex: [E:])).
4
Start up SETUP.EXE.
8-US