Blade Installation - Black & Decker BCF5201R Manuel D'instructions

SET UP & USE

BLADE INSTALLATION

13. Attach the blades to the blade brackets in the fan motor assembly using 3 screws
and 6 washers for each blade.
Remove 4 light kit screws and 4 washers from the fan motor housing. Secure the
motor cover to the fan motor assembly with the previously removed screws and
washers. Turn washer to lock in place and tighten screws.
Light Kit Screw
Star Washer
Page 18
Blade Bracket
Screw
Washers
Blade
Blade Bracket