Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
SET UP & USE
BLADE INSTALLATION
5. A. Remove the 3 screws and lock washers
on the top housing cover of the fan motor
assembly. Lift off the housing cover.
B. Insert the blade into the slots in the
housing. Secure each blade to the blade
bracket with the provided 3 screws and 3
washers. Secure each blade to the blade
bracket with the provided 3 screws and 3
washers.
C. Once all the blades are installed,
reattach the top housing cover using
the previously removed screws and
lock washers.
Slot
Page 12
Publicité
Chapitres
Table des Matières
Dépannage
