Mounting Fan To Ceiling - Black & Decker BCF5201R Manuel D'instructions

SET UP & USE
5. Choose a MOUNTING OPTION (Shown on page 8):
FLUSH INSTALLATION OPTION
If installing flush, remove the screws from the canopy and reinstall 3 screws to attach
the canopy to the motor housing as shown.
Screws
Complete the wiring options as shown on page 15. It will require two people to
complete this installation. Someone will need to hold the canopy and motor housing,
while the wires are being connected.
If you are installing a ceiling fan with a remote receiver, proceed to page 16, step 12. If
you do not need to include a remote receiver, proceed to secure the fan to the ceiling
as shown on page 17, step 13.
NORMAL DOWNROD OPTION
6. Remove clamp pin (1) and cross pin (2) from
downrod (3). Proceed to DOWNROD
INSTALLATION page 13, step 7.
Page 12
Motor
Housing
1
Canopy
3
2