Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Watching the TV
Buttons for
Projection TV
Operations
Many TV features can be accessed directly through the remote control. The
following will explain the function of some of the buttons found on your
remote control.
1 TV (FUNCTION)
Activates the remote control for use with the projection TV.
2 ANT— (AUX input)
Press to change between the VHF/UHF input and the AUX input.
3 TV (POWER)
Turns the projection TV on and off. If a video input indication (e.g.,
VIDEO 1, VIDEO 2) appears on the screen, press
a channel number appears.
4 0-9 and ENTER
Use for direct channel selection. Press
to select channel 10, press
or you can press
ENTER
5 CH +/–
Press to scan through the channels (+ up or – down).
6 VOL +/–
Press to adjust the volume (+ up or – down).
7 JUMP
Press to alternate or jump back and forth between two channels. The
projection TV will jump between the current channel and the last channel
selected.
8 MUTING
Press to mute the sound. "MUTING" will appear on the screen and will dim
three seconds later. To restore the sound, press again or press
9 FREEZE — (yellow labeled button)
This is useful when you need to copy down information that appears on the
TV's screen (see "Using the Freeze Function" on page 44).
q; SLEEP
Press repeatedly until the projection TV displays the approximate time in
minutes (15, 30, 45, 60, or 90) that you want the projection TV to remain on
before shutting off automatically.
Cancel by pressing
SLEEP
off.
to select a channel (for example,
0-9
and
). The channel will change after 2 seconds,
1
0
for immediate selection.
until "SLEEP OFF" appears or turning the power
Using the Features
or
until
TV/VIDEO
CH +/ –
.
VOL +
(Continued)
37
Publicité
Table des Matières
